A kit for the GWR Mink F bogie mink wagon. Built from 1904 these steel bogie wagons were used on mainline freight services between London and South Wales. They lasted until the 1950s with a few seeing further departmental service as internal use wagons.
This has several small parts and you will also need wire to fashion the underframe struts as well as oval buffers (eg Farish) and a pair of 5'6" plateback bogies (produced by the N Gauge Society) plus mounts.
Etches only. Reduced from the PC Models 4mm etches. This kit builds a GWR Horse Box. You will need other parts and also to build or obtain a suitable roof for the vehicle.
Great Western Railway shunters truck. A simple to build truck using a modified Peco brake van chassis to provide the correct 7ft wheelbase of these distinctive wagons. The kit contains a 3D printed one-part body and toolbox as well as a pair of etched stainless steel handrails to fit the holes in the body. You will also need some glue, a Peco 10ft brake van chassis, paint and optionally decals of your choice
Now supplied with wheels.
These kits contain an etched body shell with integral floor and fold up sides and ends, etched detailing parts, a pre-formed aluminium profile roof, a pair of 9ft etched American bogies, wheels, buffers, screws wire and white metal castings, plus full instructions and diagrams.
You will need your choice of couplers (mounts for a pair of Peco couplers are included). Suitable bogies for 2mm fine-scale are available from the 2mm Scale Association. If you would like a kit without bogies please email us and ask.
Diagram O.12, built 1919/20
Diagram O.11, built 1913/27
Diagram O.7, built 1906
Diagram O.31/40, built between 1931-4. These siphons lasted until the early 1960s, with one lasting until 1969.
Diagram P.16, built 1911
This kit contains an etched body shell with integral floor and fold up sides/ends, etched detailing parts, a pre-formed aluminium profile roof, a pair of 9ft etched American bogies, buffers, screws wire and white metal castings, plus full instructions and diagrams.
You will need to provide four sets of wheels and your choice of couplers (mounts for a pair of Peco couplers are included). Suitable bogies for 2mm finescale are available from the 2mm Scale Association.
Diagram P.21, Lot 1498-M, built 1932
1932 rebuilds from a pair of GIANTs.
Diagram P.23, Lot 1753-G. 1953 British Rail built monster.
Diagram P.24, Lot 1769-M. 1954 British Rail built Monster-C.
Diagram P.18, Lot 1265-M. 1920 built Giant with gas lighting.
Diagram P.18, Lot 1223-M. 1913 built Monsters with gas lighting.
Converts the Lima O.33/O.59 Siphon into the British Rail built O.62 Siphons which were built between 1951-55. Each kit converts 3 siphons.
The kit includes a 3D printed body shell, glue on etched overlays and underframe detailing, buffers and a pair of 9ft etched American bogies using our new 13mm axles. As these need specific special wheels the wheels are included within the kit.
You will need to provide your choice of couplers (mounts for a pair of Peco couplers are included)
With etched sides for painting the simpler liveries
With printed stick on sides in GWR livery
Pack of thirty 3D printed GWR milk churns, 10 in each of two styles of conical 17 gallon churns and ten of the latter straight sided 10 gallon churns.
My Basket